There are many reasons why you might need to get thermal imaging equipment. including finding water leaks If you are in the market for this equipment, you need to know what you should be looking for. Thermal imaging cameras are the best devices to use, but you have to get the right one for your purposes. many sites like wix and amazon have sites where they sell a varied selection of thermal imaging equipment
The Resolution And Picture Quality
The first point that you need to consider when looking at this type of equipment is the picture quality and resolution. A clear picture is vital, particularly if you are going to be using the equipment to detect faults or defects. The resolution will be measured in pixels and are determined with the Focal Array Plane sensor.
Low resolution will provide you with an image that looks like a digital camera one. The higher the resolution the more accurate detecting minute defects will be. If you not looking for very small faults, lower resolution equipment can be used.
The Display
Most of the thermal imaging equipment on the market will have a 3-inch screen at least. This will provide you with imaging at a minimal quality. A larger display will provide you with better images and higher quality. You will also get more accuracy with a large screen and this can be very important depending on what you are using the equipment for.
While looking at the display, you need to consider the refresh rate. Thermal cameras will often have a refresh rate of 9 to 60 Hz. The slower cameras will often suffer from improper focus and will be slower to scan a surface. You should ideally look at getting imaging equipment with the highest possible refresh rate.
The Sensitivity And Accuracy
There is no point in getting this type of equipment if it is not accurate. Most of these devices will be able to offer accuracy with temperature sensitivity of up to 0.1 degree Celsius. Of course, there are some devices that offer better measurement as they are more sensitive. When it comes to choosing between them, you should think about the task you are going to complete.
The Ease Of Use
Most people assume that these devices will be fairly easy to use. While they are generally operated with buttons that you can easily determine, the issue comes with the menu. This is where you will navigate the different operations and functions that you want to use.
Ideally, you will look for a camera that is intuitive and easy to use. Cameras that have few buttons could be harder to use as you have to navigate the menu to find the functions that you want. Easier to use devices will often have many buttons which are all coded to certain operations which make them easier to find.
The Battery
There is no point in getting thermal imaging equipment that does not have good battery life. You do not want the device to die halfway through your task. This is why you need to look at getting a device that offers the best possible battery life.